Scopus:
Effect of alumina addition on the microstructure properties of plasma-sprayed zirconia-alumina coatings

dc.contributor.authorIslak S.
dc.date.accessioned2023-04-12T03:06:31Z
dc.date.available2023-04-12T03:06:31Z
dc.date.issued2013-01-01
dc.description.abstractZrO2/Al2O3 coatings with different amounts of Al2O3 were fabricated on the AISI 304 stainless steel surface using plasma spray process. Phase composition and microstructure of the coatings were characterised using X-ray diffraction and scanning electron microscopy. Lamellae and porous microstructure were obtained in the coatings. In addition, a small amount of unmelted particles, partially melted, and fully melted regions in microstructure of coatings were observed. With the increasing addition of Al2O3, a decrease in the pores was determined. The results indicated that the as-prepared ZrO2/Al2O3 based coatings were mainly composed of ZrO2, Al0.52Zr0.48O1.74, ZrTiO4, Al0.18Zr0.82O1.91, Al2O3, Al2Zr3, Al3Ti and Ti2O3 phases. The microhardness of the coating was as high as 1136 HV0.2, which was 4-5 times of the substrate.
dc.identifier.issn18426573
dc.identifier.scopus2-s2.0-84883670687
dc.identifier.urihttps://hdl.handle.net/20.500.12597/6043
dc.relation.ispartofOptoelectronics and Advanced Materials, Rapid Communications
dc.rightsfalse
dc.subjectMicrostructure | Plasma spray
dc.titleEffect of alumina addition on the microstructure properties of plasma-sprayed zirconia-alumina coatings
dc.typeArticle
dspace.entity.typeScopus
oaire.citation.issue7-8
oaire.citation.volume7
person.affiliation.nameKastamonu University
person.identifier.scopus-author-id46060932200

Files