Publication:
Utilization of Sunflower Stalk in Manufacture of Thermoplastic Composite

dc.contributor.authorKaymakci A., Ayrilmis N., Ozdemir F., Gulec T.
dc.contributor.authorKaymakci, A, Ayrilmis, N, Ozdemir, F, Gulec, T
dc.date.accessioned2023-05-09T15:45:40Z
dc.date.available2023-05-09T15:45:40Z
dc.date.issued2013-12-01
dc.date.issued2013.01.01
dc.description.abstractDimensional stability and mechanical performance of polypropylene thermoplastic composites filled with sunflower stalk (SS) flour at 30, 40, 50, and 60 wt% contents of the SS flour were investigated. The thickness swelling and water absorption of the specimens increased with increasing SS flour content. The modulus in the flexural and tensile improved with increasing SS flour content while the tensile and flexural strengths of the specimens decreased. The use of maleic anhydride polypropylene (3 wt%) had a positive effect on the dimensional stability and mechanical properties of the polypropylene thermoplastic composites filled with SS flour. The melting temperature of polypropylene decreased with increasing content of the SS flour. The degree of crystallinity of filled polypropylene composites between fibre loading of 0-30 % by weight was higher than that of unfilled polypropylene composites. However, further increment in the filler content decreased the degree of crystallinity. The obtained results showed that SS flour could be potentially suitable raw material in the manufacture of polypropylene composites. © 2012 Springer Science+Business Media New York.
dc.identifier.doi10.1007/s10924-012-0564-9
dc.identifier.eissn1572-8919
dc.identifier.endpage1142
dc.identifier.issn1566-2543
dc.identifier.scopus2-s2.0-84887998369
dc.identifier.startpage1135
dc.identifier.urihttps://hdl.handle.net/20.500.12597/12573
dc.identifier.volume21
dc.identifier.wosWOS:000326933700028
dc.relation.ispartofJournal of Polymers and the Environment
dc.relation.ispartofJOURNAL OF POLYMERS AND THE ENVIRONMENT
dc.rightsfalse
dc.subjectDimensional stability | Lignocellulosic filled polypropylene composite | Mechanical testing | Waste sunflower stalk
dc.titleUtilization of Sunflower Stalk in Manufacture of Thermoplastic Composite
dc.titleUtilization of Sunflower Stalk in Manufacture of Thermoplastic Composite
dc.typeArticle
dspace.entity.typePublication
oaire.citation.issue4
oaire.citation.volume21
relation.isScopusOfPublicatione7059af4-99e5-4022-81c2-c4b98b7cf637
relation.isScopusOfPublication.latestForDiscoverye7059af4-99e5-4022-81c2-c4b98b7cf637
relation.isWosOfPublicationdcb3e324-40bf-4f71-a9b3-81df849e13cb
relation.isWosOfPublication.latestForDiscoverydcb3e324-40bf-4f71-a9b3-81df849e13cb

Files

Collections