Publication:
Influence of Repeated Injection Molding Processing on Some Mechanical and Thermal Properties of Wood Plastic Composites

dc.contributor.authorKaymakci A., Ayrilmis N.
dc.contributor.authorKaymakci, A, Ayrilmis, N
dc.date.accessioned2023-05-09T18:52:36Z
dc.date.available2023-05-09T18:52:36Z
dc.date.issued2016-01-01
dc.date.issued2016.01.01
dc.description.abstractThe influence of repeated cycles of injection molding on some mechanical and thermal properties of wood plastic composites (WPCs) was investigated. Pine wood flour (50 wt%) was mixed with HDPE (50 wt%) containing compatibilizing agent (MAPE, 3 wt%) in a co-rotating twinscrew extruder. The test specimens were produced by injection molding from the pellets dried to the moisture content (MC) of 1%. After the mechanical properties of the WPC test specimens were determined, the failed specimens were subsequently pelletized. These pellets were stored and dried for 4 to 6 h until the repeated injection was molded. These processes were repeated seven times. The results revealed that the flexural strength of WPCs increased by about 5.26% from the original granules to the third injection cycle, but further increments in the number of cycles decreased the flexural strength. The tensile strength and tensile modulus of the WPC specimens increased until the third cycle of injection molding while they tended to decrease after the third injection cycle.
dc.identifier.doi10.15376/BIORES.11.4.10112-10121
dc.identifier.endpage10121
dc.identifier.issn1930-2126
dc.identifier.scopus2-s2.0-85060663190
dc.identifier.startpage10112
dc.identifier.urihttps://hdl.handle.net/20.500.12597/13758
dc.identifier.volume11
dc.identifier.wosWOS:000391801300147
dc.relation.ispartofBioResources
dc.relation.ispartofBIORESOURCES
dc.rightstrue
dc.subjectFlexural properties | Repeated injection molding | Tensile properties | Thermal properties | WPC
dc.titleInfluence of Repeated Injection Molding Processing on Some Mechanical and Thermal Properties of Wood Plastic Composites
dc.titleInfluence of Repeated Injection Molding Processing on Some Mechanical and Thermal Properties of Wood Plastic Composites
dc.typeArticle
dspace.entity.typePublication
oaire.citation.issue4
oaire.citation.volume11
relation.isScopusOfPublication85ae82d1-5261-45af-86f2-cbdcfd4a46be
relation.isScopusOfPublication.latestForDiscovery85ae82d1-5261-45af-86f2-cbdcfd4a46be
relation.isWosOfPublication16380183-b843-4af3-b7e1-4d0e628cd927
relation.isWosOfPublication.latestForDiscovery16380183-b843-4af3-b7e1-4d0e628cd927

Files

Collections