Publication:
Mechanical and corrosion properties of alcu matrix hybrid composite materials

dc.contributor.authorIslak S.
dc.contributor.authorIslak, S
dc.date.accessioned2023-05-09T19:44:33Z
dc.date.available2023-05-09T19:44:33Z
dc.date.issued2019-01-01
dc.date.issued2019.01.01
dc.description.abstractIn this study, AlCu matrix hybride composites with various ratios of boron carbide (B4C), hexagonal boron nitride (hBN), and graphite (Gr) were produced by using hot-pressing method. The microstructure, density, mechanical and corrosion properties of these composites were investigated. Optical microscopy, scanning electron microscopy, and X-ray diffraction were used to characterize the microstructures, and the experimental densities of the composites were measured using a helium pycnometer. The mechanical properties including the hardness and transverse rupture strength were investigated using hardness and three-point bending tests, respectively. In addition, the hybrid composites were immersed in an aqueous solution of 3.5 wt.-percent NaCl at pH 3 for potentiodynamic and corrosion rate measurements. These tests revealed that a microstructure in which reinforcing particles are almost homogeneously dispersed in the matrix was obtained. Density measurements have shown that very dense and compact hybrid AMCs are produced. The hardness and transverse rupture strength of the composites were significantly increased by particulate addition to the matrix. Depending on the type and amount of reinforcement material, differences in the corrosion resistance of the hybrid composites have been determined. The results show that AlCu-8B4C-2Gr hybrid composite material has the highest corrosion resistance among the composite materials.
dc.identifier.doi10.2298/SOS1901081I
dc.identifier.endpage92
dc.identifier.issn0350-820X
dc.identifier.scopus2-s2.0-85069811059
dc.identifier.startpage81
dc.identifier.urihttps://hdl.handle.net/20.500.12597/14329
dc.identifier.volume51
dc.identifier.wosWOS:000496247800007
dc.relation.ispartofScience of Sintering
dc.relation.ispartofSCIENCE OF SINTERING
dc.rightstrue
dc.subjectCorrosion | Hot-press sintering | Hybrid composite | Mechanical properties
dc.titleMechanical and corrosion properties of alcu matrix hybrid composite materials
dc.titleMechanical and Corrosion Properties of AlCu Matrix Hybrid Composite Materials
dc.typeArticle
dspace.entity.typePublication
oaire.citation.issue1
oaire.citation.volume51
relation.isScopusOfPublicatione8b4fdfc-a75d-4fa9-b98a-1bc09453419f
relation.isScopusOfPublication.latestForDiscoverye8b4fdfc-a75d-4fa9-b98a-1bc09453419f
relation.isWosOfPublicationfeac7362-2fbe-441e-8b47-d9bb44e1c6d7
relation.isWosOfPublication.latestForDiscoveryfeac7362-2fbe-441e-8b47-d9bb44e1c6d7

Files

Collections