Publication: Experimental and numerical investigation of jet impingement cooling using extended jet holes
Loading...
Date
Organizational Units
Advisor
Editor
Journal Title
Journal ISSN
Volume Title
Type:
Publisher
Elsevier BV
DOI
10.1016/j.ijheatmasstransfer.2020.119945
Abstract
Abstract In this study, jet impingement cooling on flat surface was investigated experimentally. The aim of this study is to elucidate the effect of extended jet holes on the heat transfer performance of the in-line array jet impingement configuration. The studies were performed under fully turbulent flow condition (16250≤Re≤32500). Local Nusselt number (Nu) distribution on the surface of interest was obtained experimentally by using Transient Liquid Crystals (TLC) method. Numerical investigations were conducted as the same configuration with the experimental method to explore the flow and heat transfer characteristics. SST k-ω with low-Re correction turbulence model was used for solving turbulence equations. Experimental and numerical studies were conducted on 1×6 (in-line array) jet impingement cooling configuration. Dimensionless jet to jet spacing (Xn/Dj), dimensionless jet plate to target plate spacing (Z/Dj) and dimensionless target plate width (Y/Dj) were taken as 5.0, 6.0 and 6.0, respectively. Five different Gj/Dj (1.0, 2.0, 3.0, 4.0 and 5.0) were investigated and the results were compared with orifice plate jet impingement configuration (Z/Dj=Gj/Dj=6.0). Average and local Nu number distributions, pressure drop of the system, flow characteristics and Performance Evaluation Criterion (PEC) were examined in detail. Numerical results were compared with the experimental data and it was obtained that SST k-ω turbulence model was able to accurately predict the average and local Nu number distributions on the surface of interest. The maximum average and local Nu numbers were obtained on the condition of Gj/Dj=2.0. Furthermore, PEC shows that the most feasible dimensionless nozzle to target plate gap was Gj/Dj=2.0 at all Re numbers.
Description
Journal or Series
International Journal of Heat and Mass Transfer
ISSN
0017-9310
ISBN
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
info:eu-repo/semantics/openAccess
