Browsing by Author "Safran, S."

Now showing 1 - 5 of 5

Assessment of superconducting and structural stability of advanced Y-123 and Y-358 ceramics with Tb/Y substitution in main matrices
(Elsevier Ltd, 2024) Güdücü, G.; Öztürk, Ö.; Kurnaz, S.; Tokeşer, E.A.; Safran, S.; Yıldırım, G.
In this study, the performances of Y1-x(Tb)xBa2Cu3O7-δ (Y-123) and Y3-x(Tb)xBa5Cu8O18-δ (Y-358) advanced ceramics prepared by sol-gel preparation route are investigated by the advanced characterization methods including X-ray diffraction (XRD), temperature dependent resistivity (ρ-T), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM) and energy distribution spectroscopy (EDS) measurements and theoretical approaches. The EDS results illustrated that the Tb impurities were replaced successfully by the yttrium sites in the YBa2Cu3O7-y main matrix. Similarly, it was noted that the presence of excess impurities in the crystal structure led to the oxygenation problems. Electrical properties were determined by temperature dependent resistivity (ρ-T) measurements. ρ-T results indicated that Tb doping reduced the critical transition temperature (Tc) values for the transition to superconductivity for all samples in two YBCO phases. Although it appears to have negative effects of Tb ions on the number of mobile charge carrier concentrations in the σ antibonding in-plane Cu-O bonds, bipolaron formations in the polarizable lattices, oxidation states, and amplitude of the pair wave function of both phases, the other valuable properties (morphology, crystallinity quality, interaction between adjacent layers, critical current density, and flux pinning ability) were noted to improve remarkably in the case of the optimum amount in the Y-123 superconducting phase. In this context, the Y-358 superconducting phase was harshly affected by the substitution due to the change of the ortorombicity, localization problem, impurity phases, structure stabilization, crystal structure quality, crystallization system, homogeneities of oxidation states, oxygen ordering degree, and impurity scatterings. Besides, the analysis of the fluctuation induced conductivity indicated that the Y-123 ceramics with longer c-axis coherence length and less anisotropic nature exhibited well superconducting properties. Additionally, the doping ratio of x=0.01 led to the formation and distribution of more nucleation centers for the thermal fluxon motions of 2D pancake vortices. Similarly, the optimum Tb doped Y-123 system exhibited much durable to applied field strengths due to the best interaction quality between grains. Accordingly, this study recommended that the Y1-x(Tb)xBa2Cu3O7-δ advanced ceramic structure with new functionalities can find much more application areas in innovative, heavy-industrial technologies, and advanced engineering-related sectors.
Evolution of fundamental mechanical properties with aliovalent Co/Cu partial substitution and preparation method for Y-123 system
(2024.01.01) Ozturk, O.; Safran, S.; Ada, H.; Bulut, F.; Seydioglu, T.; Nefrow, A.R.A.; Akkurt, B.; Terzioglu, C.; Yildirim, G.
This study investigates the effect of aliovalent Co/Cu replacement and preparation method on fundamental mechanical performance features of YBa2Cu3-xCoxO7-delta (Y-123) ceramic system depending on the crack propagation mechanism by Vickers hardness measurements (H-v) and mechanical investigation models for the first time. All the findings are verified by the scanning electron microscopy (SEM) examinations. Besides, the electron-dispersive X-ray (EDX) technique verifies the successful substitution mechanism. Besides, the Vickers hardness parameters improve systematically with the increment in the Co/Cu partial substitution (serving as a barrier) level due to formation of operable slip systems, ionic bond formations, and decrement of stress-amplified strain fields. Moreover, the Y-123 ceramic produced by solid-state reaction method and molecular weight of 0.20% presents the densest and smoothest surface morphology with the largest particle distributions and well-linked cobblestone-like grains. On the other hand, the Y-123 ceramic compounds produced by the sol-gel method are more sensitive and responsive to the indentation test loads. All the findings are wholly supported by the mechanical performance properties, including the shear modulus, resilience, and degree of granularity. Furthermore, the mechanical models indicate that every compound prepared exhibits the untypical reverse indentation size effect (RISE). Additionally, the modeling studies display that the induced cracking (IIC) approach is found to be the most appropriate method to examine true Vickers hardness parameters in the plateau limit regions. All in all, this comprehensive study reports efficiently exploiting the process-structure-property relationships in Y-123 ceramic material design for physical science and mechanical application fields using the aliovalent partial substitution and preparation condition.
Evolution of fundamental mechanical properties with aliovalent Co/Cu partial substitution and preparation method for Y-123 system
(Springer, 2024) Ozturk, O.; Safran, S.; Ada, H.; Bulut, F.; Seydioglu, T.; Nefrow, A.R.A.; Akkurt, B.; Terzioglu, C.; Yildirim, G.
This study investigates the effect of aliovalent Co/Cu replacement and preparation method on fundamental mechanical performance features of YBa2Cu3−xCoxO7−δ (Y-123) ceramic system depending on the crack propagation mechanism by Vickers hardness measurements (Hv) and mechanical investigation models for the first time. All the findings are verified by the scanning electron microscopy (SEM) examinations. Besides, the electron-dispersive X-ray (EDX) technique verifies the successful substitution mechanism. Besides, the Vickers hardness parameters improve systematically with the increment in the Co/Cu partial substitution (serving as a barrier) level due to formation of operable slip systems, ionic bond formations, and decrement of stress-amplified strain fields. Moreover, the Y-123 ceramic produced by solid-state reaction method and molecular weight of 0.20% presents the densest and smoothest surface morphology with the largest particle distributions and well-linked cobblestone-like grains. On the other hand, the Y-123 ceramic compounds produced by the sol–gel method are more sensitive and responsive to the indentation test loads. All the findings are wholly supported by the mechanical performance properties, including the shear modulus, resilience, and degree of granularity. Furthermore, the mechanical models indicate that every compound prepared exhibits the untypical reverse indentation size effect (RISE). Additionally, the modeling studies display that the induced cracking (IIC) approach is found to be the most appropriate method to examine true Vickers hardness parameters in the plateau limit regions. All in all, this comprehensive study reports efficiently exploiting the process–structure–property relationships in Y-123 ceramic material design for physical science and mechanical application fields using the aliovalent partial substitution and preparation condition.
Stabilization of durable tetragonal phase and barrier regions in y-123 ceramic systems with partial substitution mechanism
(Springer, 2024) Güdücü, G.; Safran, S.; Kurnaz, S.; Tokeşer, E.A.; Seydioğlu, T.; Yildirim, G.; Öztürk, Ö.
This study examines the impact of Tb and Zn doping on the Y-123 superconducting system by analyzing crack propagation mechanisms through Vickers microhardness measurements. The measurements are conducted at various application forces ranging from 0.245 N to 2.940 N. The microhardness measurements are used to determine the role of impurity addition on Vickers hardness, modulus of elasticity, brittleness index, fracture toughness, and yield strengths. It is found that impurity ions serving as strong barrier regions improve the surface residual compressive stress sites and interactivity between the adjacent layers. Similarly, the sensitivity to the external forces reduce significantly with the substitution mechanism due to the induced new slip systems and ionic bond formations. Accordingly, all the mechanical performance properties are recorded to increase significantly with the impurity ions. Especially, the replacement of Zn by Cu ions in the Y-123 matrix exhibits higher resistance to failure, mechanical strength, and stabilization of the durable tetragonal phase. Accordingly, Zn/Cu substitution in Y-123 ceramics paves the way for the applications of ceramic compounds in the fields of heavy-industrial technology and industrial power systems. All the ceramic materials also exhibit indentation size effect feature based on the recovery mechanism. Additionally, load-independent microhardness parameters are semi-empirically modeled by Meyer's law, Hays-Kendall, indentation-induced cracking, elastic–plastic deformation, and proportional sample resistance model for the first time. According to the comparisons, the IIC model is identified as the most suitable for interpreting the real microhardness results of newly produced Y-123 ceramic matrices.
Stabilization of durable tetragonal phase and barrier regions in y-123 ceramic systems with partial substitution mechanism
(2024.01.01) Güdücü, G.; Safran, S.; Kurnaz, S.; Tokeser, E.A.; Seydioglu, T.; Yildirim, G.; Öztürk, Ö.
This study examines the impact of Tb and Zn doping on the Y-123 superconducting system by analyzing crack propagation mechanisms through Vickers microhardness measurements. The measurements are conducted at various application forces ranging from 0.245 N to 2.940 N. The microhardness measurements are used to determine the role of impurity addition on Vickers hardness, modulus of elasticity, brittleness index, fracture toughness, and yield strengths. It is found that impurity ions serving as strong barrier regions improve the surface residual compressive stress sites and interactivity between the adjacent layers. Similarly, the sensitivity to the external forces reduce significantly with the substitution mechanism due to the induced new slip systems and ionic bond formations. Accordingly, all the mechanical performance properties are recorded to increase significantly with the impurity ions. Especially, the replacement of Zn by Cu ions in the Y-123 matrix exhibits higher resistance to failure, mechanical strength, and stabilization of the durable tetragonal phase. Accordingly, Zn/Cu substitution in Y-123 ceramics paves the way for the applications of ceramic compounds in the fields of heavy-industrial technology and industrial power systems. All the ceramic materials also exhibit indentation size effect feature based on the recovery mechanism. Additionally, load-independent microhardness parameters are semi-empirically modeled by Meyer's law, Hays-Kendall, indentation-induced cracking, elastic-plastic deformation, and proportional sample resistance model for the first time. According to the comparisons, the IIC model is identified as the most suitable for interpreting the real microhardness results of newly produced Y-123 ceramic matrices.