Browsing by Author "Prakash, C."

Now showing 1 - 3 of 3

Adsorption effectiveness and properties of an enriched activated carbon from residual biomass materials for non-polar benzene in gaseous environment
(2024.01.01) Isinkaralar, K.; Turkyilmaz, A.; Hosseini-Bandegharaei, A.; Prakash, C.
During the last century, benzene (C6H6) has been a highly studied substance, with some acute and chronic exposures leading directly to hematologic effects detected in humans. This work reports on preparing and examining biomass-derived activated carbons (HPACs) featuring high benzene adsorptive capacity. The fundamental goal of this paper is to propose a green approach for generating HPACs from Heracleum platytaenium Boiss. (Cow parsnip) as woody biomass using a low-cost approach. The characterization showed that chemical activation elicits more enhanced mesoporous structure, a higher degree of graphitization, and bulk porous structure with higher specific surface area and pore volume. To minimize the use of chemicals in the manufacture of high-performance HPACs, an essential pre-pyrolysis step was implemented prior to the chemical activation of biomass by NaOH. The samples were carbonized at different temperatures (500-900 degrees C) and named as HPAC500, HPAC600, HPAC700, HPAC800, and HPAC900. Considering micropore volume and total surface area, HPAC600 was superior, and maximum benzene adsorption capacities were: HPAC600 (127 mg/g) > HPAC700 (117 mg/g) > HPAC800 (101 mg/g) > HPAC500 (80 mg/g) > HPAC900 (59 mg/g) at selected conditions. Freundlich, Langmuir, and pseudo-first-order (PFO) and pseudo-second-order (PSO) models were used to mathematically describe HPAC600-vapor benzene sorption on HPAC600. The kinetic findings fitted PFO with optimal values of R-2 = 0.999, and the isotherm model adsorption fitted Freundlich model (R-2 = 1.000). The finding revealed that H. platytaenium is a useful material for producing adsorbents, and successful testing outcomes demonstrate that H. platytaenium products serve as a suitable benzene absorbent.
Single and binary adsorption of paracetamol and diclofenac onto biochar produced from pepper stem: Which adsorption properties change in the binary system?
(Elsevier B.V., 2024) Azri, N.; Chebbi, R.; Ouakouak, A.; Hecini, L.; Isinkaralar, K.; Fadel, A.; Bokov, D.O.; Prakash, C.; Hosseini-Bandegharaei, A.
The importance of combating the contamination of water resources with emerging pollutants must be kept all the more in view by scientists, since such pollutants are harmful and pose challenges for traditional water treatment methods. The current study was designed to scrutinize the adsorption properties of a low-cost biochar for two pharmaceuticals in both single and binary systems. The work was focused on understanding how paracetamol (PARA) and diclofenac (DIC) co-adsorb, and it can serve as a beacon for similar studies, especially in modeling the adsorption processes of such systems. Using a low-cost biochar from pepper stem (PS) with a high surface area = 727.5 m2/g as adsorbent, experiments were carried out in both the single and binary systems to investigate the adsorption behavior of the mentioned pharmaceuticals. Results showed that, in the single system, the PS biochar demonstrates a slightly greater adsorption capability for both PARA and DIC, with a capacity of 354.66 and 256.10 mg/g, respectively, compared to its capacity for each pharmaceutical in the presence of the other in the solution. Interestingly, the effect of the presence of one of the pharmaceuticals on the thermodynamic parameters (ΔGº, ΔSº, and ΔHº) of the other was ignorable, and interactions such as hydrogen bonding, π-π, n-π, and anion-π interactions were at work for the adsorption processes, with different extends in each pharmaceutical-biochar case. On the other hand, the presence of one of the pharmaceuticals was effective on the kinetics of the adsorption process of the other and caused a decrease in its adsorption rate, especially in the initial stage of the process. Overall, in addition to the suitability of pepper stem biochar for PARA and DIC, results showed that the presence of one pharmaceutical is not influential on all the adsorption properties of the other, and the results can be exploited for studding similar systems.
Single and binary adsorption of paracetamol and diclofenac onto biochar produced from pepper stem: Which adsorption properties change in the binary system?
(2024.01.01) Azri, N.; Chebbi, R.; Ouakouak, A.; Hecini, L.; Isinkaralar, K.; Fadel, A.; Bokov, D.O.; Prakash, C.; Hosseini-Bandegharaei, A.
The importance of combating the contamination of water resources with emerging pollutants must be kept all the more in view by scientists, since such pollutants are harmful and pose challenges for traditional water treatment methods. The current study was designed to scrutinize the adsorption properties of a low-cost biochar for two pharmaceuticals in both single and binary systems. The work was focused on understanding how paracetamol (PARA) and diclofenac (DIC) co-adsorb, and it can serve as a beacon for similar studies, especially in modeling the adsorption processes of such systems. Using a low-cost biochar from pepper stem (PS) with a high surface area = 727.5 m2/g as adsorbent, experiments were carried out in both the single and binary systems to investigate the adsorption behavior of the mentioned pharmaceuticals. Results showed that, in the single system, the PS biochar demonstrates a slightly greater adsorption capability for both PARA and DIC, with a capacity of 354.66 and 256.10 mg/g, respectively, compared to its capacity for each pharmaceutical in the presence of the other in the solution. Interestingly, the effect of the presence of one of the pharmaceuticals on the thermodynamic parameters (Delta G degrees, Delta S degrees, and Delta H degrees) of the other was ignorable, and interactions such as hydrogen bonding, n-n, n-n, and anion-n interactions were at work for the adsorption processes, with different extends in each pharmaceutical-biochar case. On the other hand, the presence of one of the pharmaceuticals was effective on the kinetics of the adsorption process of the other and caused a decrease in its adsorption rate, especially in the initial stage of the process. Overall, in addition to the suitability of pepper stem biochar for PARA and DIC, results showed that the presence of one pharmaceutical is not influential on all the adsorption properties of the other, and the results can be exploited for studding similar systems.