Browsing by Author "Emin, N."

Now showing 1 - 6 of 6

Effects of using collagen and aloe vera grafted fibroin scaffolds on osteogenic differentiation of rat bone marrow mesenchymal stem cells in SBF-enriched cell culture medium
(2023) Mohamed, S. A. T.; Emin, N.
In the study, collagen and aloe vera were grafted onto silk fibroin with two different methods, and 3D-microporous scaffolds were formed by lyophilization. Three osteogenic cultures were started by seeding rat bone marrow mesenchymal stem cells (MSC) and pre-induced MSC (OB) on biopolymeric scaffolds. The osteogenic medium was enriched with 10% (v/v) simulated body fluid (SBF) to promote mineralization and osteogenic differentiation in one of the MSC cultures and the OB culture. XRD, SEM, SEM-EDS analyses on cellular samples and histochemical (alizarin red, safranin-O, alcian blue) and immunohistochemical (anti-collagen-1, anti-osteocalcin, anti-osteopontin) staining showed that bone-like mineralization was occurred by both chemically and cellular activity. In addition, pre-osteogenic induction of MSCs in 2D-cultured was found to promote osteogenesis more rapidly when started 3D-cultured. These results indicated that enrichment of the cell culture medium with SBF is sufficient for in vitro mineralization rather than using high concentrations of SBF. The findings showed that OB cells on the 2F5C4A1 scaffold obtained the best osteogenic activity. Still, other culture media with 10% SBF content could be used for bone tissue engineering under osteogenic induction.
Effects of using collagen and aloe vera grafted fibroin scaffolds on osteogenic differentiation of rat bone marrow mesenchymal stem cells in SBF-enriched cell culture medium
(2024.01.01) Mohamed, S.A.T.; Emin, N.
In the study, collagen and aloe vera were grafted onto silk fibroin with two different methods, and 3D-microporous scaffolds (1F5C4A1 and 2F5C4A1) were formed by lyophilization. Three osteogenic cultures were started by seeding rat bone marrow mesenchymal stem cells (MSCs) and pre-induced MSC (osteoblast (OB)) on biopolymeric scaffolds. The osteogenic medium was enriched with 10% (v/v) simulated body fluid (SBF) to promote mineralization and osteogenic differentiation in one of the MSC cultures and the OB culture. X-ray diffraction (XRD), scanning electron microscopy (SEM), scanning electron microscopy- energy dispersive spectrum (SEM-EDS) analyses on cellular samples and histochemical (alizarin red, safranin-O, alcian blue) and immunohistochemical (anti-collagen-1, anti-osteocalcin, anti-osteopontin) staining showed that bone-like mineralization was occurred by both chemically and cellular activity. In addition, pre-osteogenic induction of MSCs in 2D-cultured was found to promote osteogenesis more rapidly when started 3D-cultured. These results indicated that enrichment of the cell culture medium with SBF is sufficient for in vitro mineralization rather than using high concentrations of SBF. The findings showed that OB cells on the 2F5C4A1 scaffold obtained the best osteogenic activity. Still, other culture media with 10% SBF content could be used for bone tissue engineering under osteogenic induction.
Effects of using collagen and aloe vera grafted fibroin scaffolds on osteogenic differentiation of rat bone marrow mesenchymal stem cells in SBF-enriched cell culture medium
(2023) Taher Mohamed, S.A.; Emin, N.
In the study, collagen and aloe vera were grafted onto silk fibroin with two different methods, and 3D-microporous scaffolds (1F5C4A1 and 2F5C4A1) were formed by lyophilization. Three osteogenic cultures were started by seeding rat bone marrow mesenchymal stem cells (MSCs) and pre-induced MSC (osteoblast (OB)) on biopolymeric scaffolds. The osteogenic medium was enriched with 10% (v/v) simulated body fluid (SBF) to promote mineralization and osteogenic differentiation in one of the MSC cultures and the OB culture. X-ray diffraction (XRD), scanning electron microscopy (SEM), scanning electron microscopy- energy dispersive spectrum (SEM-EDS) analyses on cellular samples and histochemical (alizarin red, safranin-O, alcian blue) and immunohistochemical (anti-collagen-1, anti-osteocalcin, anti-osteopontin) staining showed that bone-like mineralization was occurred by both chemically and cellular activity. In addition, pre-osteogenic induction of MSCs in 2D-cultured was found to promote osteogenesis more rapidly when started 3D-cultured. These results indicated that enrichment of the cell culture medium with SBF is sufficient forin vitromineralization rather than using high concentrations of SBF. The findings showed that OB cells on the 2F5C4A1 scaffold obtained the best osteogenic activity. Still, other culture media with 10% SBF content could be used for bone tissue engineering under osteogenic induction.
Electrochemical, mechanical, and antibacterial properties of the AZ91 Mg alloy by hybrid and layered hydroxyapatite and tantalum oxide sol-gel coating
(2023.09.28) Albayrak, S.; Gul, C.; Emin, N.; Gokmen, U.; Karakoc, H.; Uzun, A.; Çinici, H.
The corrosion and bacterial behavior of AZ91 magnesium alloy coated with sol-gel-deposited amorphous tantalum oxide and hydroxyapatite have been investigated. The objective was to assess the potential suitability of AZ91 for permanent prosthesis applications. The coatings were applied in layered and hybrid configurations and characterized using various techniques including X-ray diffractometry, Fourier transform infrared spectroscopy, scanning electron microscopy/energy dispersive spectrometry, and drop analyses. The antibacterial properties were evaluated through interactions with Staphylococcus aureus and Escherichia coli strains. Mechanical properties and adhesion were determined via linear scratch tests, and electro-chemical corrosion tests were conducted in different media. The release of aluminum ions from the samples in Dulbec-co's Modified Eagle's Medium was monitored over 28 days. The findings revealed that the amorphous tantalum oxide coating, particularly in combination with hydroxyapatite, improved antibacterial properties and positively influenced corrosion and scratch resistance. The layered and hybrid coatings demonstrated the highest corrosion resistance. The release of aluminum ions remained within acceptable levels in the tested medium. Overall, the study provides valuable insights into the potential of sol-gel coatings on AZ91 for prosthetic applications, considering antibacterial behavior, corrosion resistance, and aluminum release.
Microstructural, mechanical, and biocompatibility properties of Ti-Cu/B4C composites for biomedical applications
(2024.01.01) Islak, S.; Houssain, H.; Emin, N.; Yazar, H.; Danaci, H.C.; Koç, V.
This study investigated the effects of B4C on the microstructural, mechanical, and biocompatibility properties of Ti-Cu/B4C composites produced by powder metallurgy. Different amounts of B4C (3, 6, 9, and 12 %) were added to the Ti-Cu matrix. XRD results showed that Ti2Cu, alpha-Ti, TiB, and B4C phases formed in the microstructure. The addition of B4C and the phases forming in the microstructure resulted in significant increases in the hardness and wear resistance of the composites. SEM images of the wear surfaces showed that the abrasive wear mechanism was dominant. Biodegradability analyses showed that sodium, found in trace amounts in the structure of the alloys, and calcium, released from the structure of B4C into the medium, were the least at the addition of 6 % B4C. Considering the reduced amount of phosphate in the medium, it was found that the mass gain observed in the specimens was due to the deposition of calcium-phosphate precipitates on the surface of the composites. This result suggested that Ti-Cu/B4C alloys were bioactive for bone and may provide osteointegration. Indirect MTT analysis with bone marrow mesenchymal stem cells showed that the specimens were cytotoxic at an acute dose on the first day. However, the cytotoxic effect diminished when they were kept in the PBS medium and replaced every other day for 28 days. Notably, the composite specimen with the addition of 6 % B4C demonstrated maximum cytocompatibility. Consequently, it indicated that adding B4C to the alloy improved osteogenic properties, although it partially increased copper release into the medium.
Microstructural, mechanical, and biocompatibility properties of Ti–Cu/B4C composites for biomedical applications
(Elsevier Ltd, 2024) Islak, S.; Houssain, H.; Emin, N.; Yazar, H.; Danacı, H.C.; Koç, V.
This study investigated the effects of B4C on the microstructural, mechanical, and biocompatibility properties of Ti–Cu/B4C composites produced by powder metallurgy. Different amounts of B4C (3, 6, 9, and 12 %) were added to the Ti–Cu matrix. XRD results showed that Ti2Cu, α-Ti, TiB, and B4C phases formed in the microstructure. The addition of B4C and the phases forming in the microstructure resulted in significant increases in the hardness and wear resistance of the composites. SEM images of the wear surfaces showed that the abrasive wear mechanism was dominant. Biodegradability analyses showed that sodium, found in trace amounts in the structure of the alloys, and calcium, released from the structure of B4C into the medium, were the least at the addition of 6 % B4C. Considering the reduced amount of phosphate in the medium, it was found that the mass gain observed in the specimens was due to the deposition of calcium-phosphate precipitates on the surface of the composites. This result suggested that Ti–Cu/B4C alloys were bioactive for bone and may provide osteointegration. Indirect MTT analysis with bone marrow mesenchymal stem cells showed that the specimens were cytotoxic at an acute dose on the first day. However, the cytotoxic effect diminished when they were kept in the PBS medium and replaced every other day for 28 days. Notably, the composite specimen with the addition of 6 % B4C demonstrated maximum cytocompatibility. Consequently, it indicated that adding B4C to the alloy improved osteogenic properties, although it partially increased copper release into the medium.