Browsing by Author "Ahiskali, A."

Now showing 1 - 2 of 2

Feasibility of foam concrete using recycled brick and roof tile fine aggregates
(2024.01.01) Bayraktar, O.Y.; Ahiskali, A.; Ahiskali, M.; Eksioglu, F.; Kaplan, G.; Assaad, J.
Brick (BR) and roof tile (RT) fine aggregate fractions derived from construction and demolition wastes have a low recycling rate in new construction and building materials. This article assesses their suitability for replacing the limestone aggregate in foam concrete, which helps valorise such fractions and conserve natural limestone resources. Two concrete categories containing or not silica fume (SF) were investigated, while the BR and RT aggregate replacement rates were 10%, 20% and 40%. Tested properties include flow, density, water absorption, porosity, thermal conductivity, mechanical strengths, microscopy, drying shrinkage, resistance to freeze/thaw cycles and elevated temperature. Results showed that the concrete mechanical properties improved when the limestone aggregate was replaced by 10% BR or RT but gradually curtailed at higher addition rates. Such results concorded with the density, water absorption and porosity measurements. Foamed concrete containing BR is more resistant (compared to RT) to drying shrinkage, freeze/thaw cycle, and heat exposure, which was ascribed to the relatively lower BR porosity that improves the concrete mechanical properties and durability.
Mechanical and durability properties of polymer fiber reinforced one-part foam geopolymer concrete: A sustainable strategy for the recycling of waste steel slag aggregate and fly ash
(2024.01.01) Ahiskali, A.; Ahiskali, M.; Bayraktar, O.Y.; Kaplan, G.; Assaad, J.
This paper assesses the feasibility of geopolymers (GPs) for use as lightweight foamed concrete, a crucial step towards reducing the carbon footprint and conserving natural resources. A powder activator (i.e., sodium metasilicate) less harmful to the environment was used to activate the fly ash-based GPs, while the limestone aggregates were gradually replaced by up to 100 % waste slag materials to conserve natural resources. Polypropylene fibers were incorporated at high dosage rates of 1 % or 2 %, by volume, to reduce the concrete density and improve its durability properties. Tested properties include flow, density, water absorption, porosity, thermal conductivity, mechanical strengths, drying shrinkage, and resistance to sulfate attack, freeze/thaw cycles, and elevated temperature. Results showed that the concrete mechanical properties improved when the limestone aggregate was replaced by slag materials, but the density and thermal conductivity were slightly curtailed at higher addition rates. The use of polypropylene fibers proved efficient to improve the resistance to freeze/thaw cycles, drying shrinkage, and expansion due to sulphate attack. Such data can help sustain the green building industry development by reducing the carbon footprint and conserving natural resources in foamed concrete applications.