Yayın:
The effect of aging processes on tribo-metallurgy properties of al based ternary alloys product by P/M technique

Basit Görünüm
dc.contributor.authorKaplan, Yavuz
dc.contributor.authorAksöz, Sinan
dc.contributor.authorAda, H.
dc.contributor.authorİnce, E.
dc.contributor.authorÖzsoy, S.
dc.date.accessioned2026-01-04T13:49:40Z
dc.date.issued2020-01-01
dc.description.abstractIn this study, Al matrix composites consisting of different amounts of Zn, Cu, and Mg were produced using the powder metallurgy technique. In the alloying, powders were ball milled for 120 min via mechanical alloying. After alloying process, the powders were pressed at 800 MPa at room temperature. Sintering (2 h at 600?C in argon atmosphere), solution treatment (2 h at 480?C), and aging processes (3, 6, 9, and 12 h, respectively, at 120?C) were applied to the samples. The hardness and tribo-metallurgy properties of the products were investigated. After sintering, the hardness values of the three alloys were close to each other; however, the solution treatment after sintering caused the hardness values to increase significantly. It was determined that the Al-2Zn-5Cu-4Mg alloy had the highest hardness increase with the 6-h aging heat treatment. The wear resistance of the materials in all the compositions had increased. The highest wear resistance and lowest friction coefficient were obtained for the Al-2Zn-5Cu-4Mg alloy with the 6-h aging heat treatment.
dc.description.urihttps://doi.org/10.2298/sos2004445k
dc.description.urihttp://www.doiserbia.nb.rs/ft.aspx?id=0350-820X2004445K
dc.description.urihttps://doaj.org/article/1b9eae82a59b448b982dafa312c7bb16
dc.description.urihttps://dx.doi.org/10.2298/sos2004445k
dc.description.urihttps://avesis.gazi.edu.tr/publication/details/62647777-d98e-433a-b89d-5dec3d10ddf8/oai
dc.description.urihttps://hdl.handle.net/11499/37408
dc.description.urihttps://doi.org/https://doi.org/10.2298/SOS2004445K
dc.identifier.doi10.2298/sos2004445k
dc.identifier.eissn1820-7413
dc.identifier.endpage456
dc.identifier.issn0350-820X
dc.identifier.openairedoi_dedup___::a316d810ed74a3d89383237b73b5308b
dc.identifier.orcid0000-0003-4324-5043
dc.identifier.scopus2-s2.0-85098598286
dc.identifier.startpage445
dc.identifier.urihttps://hdl.handle.net/20.500.12597/37757
dc.identifier.volume52
dc.identifier.wos000600505000006
dc.language.isoeng
dc.publisherNational Library of Serbia
dc.relation.ispartofScience of Sintering
dc.rightsOPEN
dc.subjectAging
dc.subjectwear
dc.subjectsintering
dc.subjectTribology
dc.subjectTernary Alloys, Tribology
dc.subjectChemical technology
dc.subjectaging
dc.subjectternary alloys
dc.subjectTernary Alloys
dc.subjectTP1-1185
dc.subjectSintering
dc.subjectWear
dc.subjecttribology
dc.titleThe effect of aging processes on tribo-metallurgy properties of al based ternary alloys product by P/M technique
dc.typeArticle
dspace.entity.typePublication
local.api.response{"authors":[{"fullName":"Kaplan, Yavuz","name":"Yavuz","surname":"Kaplan","rank":1,"pid":null},{"fullName":"Aksöz, Sinan","name":"Sinan","surname":"Aksöz","rank":2,"pid":{"id":{"scheme":"orcid_pending","value":"0000-0003-4324-5043"},"provenance":null}},{"fullName":"Ada, H.","name":"H.","surname":"Ada","rank":3,"pid":null},{"fullName":"İnce, E.","name":"E.","surname":"İnce","rank":4,"pid":null},{"fullName":"Özsoy, S.","name":"S.","surname":"Özsoy","rank":5,"pid":null}],"openAccessColor":null,"publiclyFunded":false,"type":"publication","language":{"code":"eng","label":"English"},"countries":null,"subjects":[{"subject":{"scheme":"keyword","value":"Aging"},"provenance":null},{"subject":{"scheme":"keyword","value":"wear"},"provenance":null},{"subject":{"scheme":"keyword","value":"sintering"},"provenance":null},{"subject":{"scheme":"keyword","value":"Tribology"},"provenance":null},{"subject":{"scheme":"keyword","value":"Ternary Alloys, Tribology"},"provenance":null},{"subject":{"scheme":"keyword","value":"Chemical technology"},"provenance":null},{"subject":{"scheme":"keyword","value":"aging"},"provenance":null},{"subject":{"scheme":"keyword","value":"ternary alloys"},"provenance":null},{"subject":{"scheme":"FOS","value":"0211 other engineering and technologies"},"provenance":null},{"subject":{"scheme":"keyword","value":"Ternary Alloys"},"provenance":null},{"subject":{"scheme":"keyword","value":"TP1-1185"},"provenance":null},{"subject":{"scheme":"FOS","value":"02 engineering and technology"},"provenance":null},{"subject":{"scheme":"keyword","value":"620"},"provenance":null},{"subject":{"scheme":"keyword","value":"Sintering"},"provenance":null},{"subject":{"scheme":"keyword","value":"Wear"},"provenance":null},{"subject":{"scheme":"FOS","value":"0205 materials engineering"},"provenance":null},{"subject":{"scheme":"keyword","value":"tribology"},"provenance":null}],"mainTitle":"The effect of aging processes on tribo-metallurgy properties of al based ternary alloys product by P/M technique","subTitle":null,"descriptions":["<jats:p>In this study, Al matrix composites consisting of different amounts of Zn, Cu, and Mg were produced using the powder metallurgy technique. In the alloying, powders were ball milled for 120 min via mechanical alloying. After alloying process, the powders were pressed at 800 MPa at room temperature. Sintering (2 h at 600?C in argon atmosphere), solution treatment (2 h at 480?C), and aging processes (3, 6, 9, and 12 h, respectively, at 120?C) were applied to the samples. The hardness and tribo-metallurgy properties of the products were investigated. After sintering, the hardness values of the three alloys were close to each other; however, the solution treatment after sintering caused the hardness values to increase significantly. It was determined that the Al-2Zn-5Cu-4Mg alloy had the highest hardness increase with the 6-h aging heat treatment. The wear resistance of the materials in all the compositions had increased. The highest wear resistance and lowest friction coefficient were obtained for the Al-2Zn-5Cu-4Mg alloy with the 6-h aging heat treatment.</jats:p>"],"publicationDate":"2020-01-01","publisher":"National Library of Serbia","embargoEndDate":null,"sources":["Crossref","Science of Sintering, Vol 52, Iss 4, Pp 445-456 (2020)"],"formats":["application/pdf"],"contributors":["0000-0002-3144-9332","0000-0003-4324-5043"],"coverages":null,"bestAccessRight":{"code":"c_abf2","label":"OPEN","scheme":"http://vocabularies.coar-repositories.org/documentation/access_rights/"},"container":{"name":"Science of Sintering","issnPrinted":"0350-820X","issnOnline":"1820-7413","issnLinking":null,"ep":"456","iss":null,"sp":"445","vol":"52","edition":null,"conferencePlace":null,"conferenceDate":null},"documentationUrls":null,"codeRepositoryUrl":null,"programmingLanguage":null,"contactPeople":null,"contactGroups":null,"tools":null,"size":null,"version":null,"geoLocations":null,"id":"doi_dedup___::a316d810ed74a3d89383237b73b5308b","originalIds":["10.2298/sos2004445k","50|doiboost____|a316d810ed74a3d89383237b73b5308b","50|doajarticles::fad37d5c6b58b7542c9011bf27349d6e","oai:doaj.org/article:1b9eae82a59b448b982dafa312c7bb16","3108174779","62647777-d98e-433a-b89d-5dec3d10ddf8","50|od_____10046::03672a62764b0741f9e05c6369fe03e9","50|od_____10652::4df39f118e4a1cefc77aa1486c228933","oai:gcris.pau.edu.tr:11499/37408","oai:acikerisim.pau.edu.tr:11499/37408","50|od______3566::17dfdf80d061ee11b3b8b6932b9564dc","ftpamukkaleuniv:oai:gcris.pau.edu.tr:11499/37408","50|base_oa_____::9c472a3650f641478f05f94603b04634"],"pids":[{"scheme":"doi","value":"10.2298/sos2004445k"},{"scheme":"handle","value":"11499/37408"}],"dateOfCollection":null,"lastUpdateTimeStamp":null,"indicators":{"citationImpact":{"citationCount":15,"influence":3.2957588e-9,"popularity":1.3213933e-8,"impulse":11,"citationClass":"C4","influenceClass":"C5","impulseClass":"C4","popularityClass":"C4"}},"instances":[{"pids":[{"scheme":"doi","value":"10.2298/sos2004445k"}],"license":"CC BY","type":"Article","urls":["https://doi.org/10.2298/sos2004445k"],"publicationDate":"2020-01-01","refereed":"peerReviewed"},{"pids":[{"scheme":"doi","value":"10.2298/sos2004445k"}],"license":"CC BY","type":"Article","urls":["http://www.doiserbia.nb.rs/ft.aspx?id=0350-820X2004445K"],"refereed":"nonPeerReviewed"},{"alternateIdentifiers":[{"scheme":"doi","value":"10.2298/sos2004445k"}],"type":"Article","urls":["https://doaj.org/article/1b9eae82a59b448b982dafa312c7bb16"],"publicationDate":"2020-01-01","refereed":"nonPeerReviewed"},{"alternateIdentifiers":[{"scheme":"doi","value":"10.2298/sos2004445k"},{"scheme":"mag_id","value":"3108174779"}],"type":"Article","urls":["https://dx.doi.org/10.2298/sos2004445k"],"refereed":"nonPeerReviewed"},{"alternateIdentifiers":[{"scheme":"doi","value":"10.2298/sos2004445k"}],"type":"Article","urls":["https://avesis.gazi.edu.tr/publication/details/62647777-d98e-433a-b89d-5dec3d10ddf8/oai"],"publicationDate":"2020-12-01","refereed":"nonPeerReviewed"},{"pids":[{"scheme":"handle","value":"11499/37408"}],"alternateIdentifiers":[{"scheme":"doi","value":"10.2298/sos2004445k"}],"type":"Article","urls":["https://doi.org/10.2298/sos2004445k","https://hdl.handle.net/11499/37408"],"publicationDate":"2020-01-01","refereed":"nonPeerReviewed"},{"pids":[{"scheme":"handle","value":"11499/37408"}],"type":"Article","publicationDate":"2020-01-01","refereed":"nonPeerReviewed"},{"pids":[{"scheme":"handle","value":"11499/37408"}],"alternateIdentifiers":[{"scheme":"doi","value":"10.2298/sos2004445k"}],"type":"Article","urls":["https://doi.org/https://doi.org/10.2298/SOS2004445K"],"publicationDate":"2020-01-01","refereed":"nonPeerReviewed"}],"isGreen":true,"isInDiamondJournal":true}
local.import.sourceOpenAire
local.indexed.atWOS
local.indexed.atScopus

Dosyalar

Koleksiyonlar

Publications