Analysis of wettability and contact angle of sodium bicarbonate impregnated wooden surfaces

Abstract

Scots pine and spruce wood samples were vacuum impregnated with 3, 5, and 9% sodium bicarbonate solution. Contact angle measurements were made by dropping 0.05 mL of pure water and 3% saltwater solution onto the material’s surface. The surface roughness of each sample was measured, and that of Scots pine control samples was higher than that of spruce samples, but the surface roughness values of spruce wood were higher in the samples impregnated with sodium bicarbonate. When pure water or saltwater solution was dropped onto the samples, it was observed that as the waiting times increased, the contact angle value decreased, the droplet height decreased, and the droplet width increased. It was found that the contact angles were higher in the control samples of both tree species than in the samples of 5% and 7%. The contact angles of 9% impregnation solution, pure water, and salt water were higher than the control samples. As the solution ratio increased on the surfaces impregnated with sodium bicarbonate, the contact angle also increased, and the wettability behavior decreased accordingly. Sodium bicarbonate solution is effectively used in the impregnation process for pine and fir woods, making the materials more resistant to water under outdoor conditions. This solution significantly reduces the risk of deformation of wood by increasing the contact angle and reducing its water absorption properties.