Abo sbia A.E.S., Uzun A.Sbia, AESA, Uzun, A2023-05-092023-05-092022-09-012022.01.010972-2815https://hdl.handle.net/20.500.12597/12697In this study, aluminum foams reinforced with multi-walled carbon nanotubes (0%, 0.5%, 1%, and 2% by weight) were produced by powder metallurgy method using different proportions of spherical urea (15%, 30%, and 50% by weight) as space holder. It analyzes the pore morphology and pore distribution of the produced composite foams and examines their mechanical properties under qua-static compressive loading. The results show that the effect of multi-walled carbon nanotubes existing in the cell wall on pore morphology and pore distribution was insignificant. The highest hardness value (65 HV) was determined in the foam samples containing 2% multi-walled carbon nanotube produced with 15% urea. Composite aluminum foam samples with 30–69% porosity and 0.84–1.90 g cm−3 density were successfully produced. The compression properties of the samples decreased with the decrease in the relative densities.falseAluminum foam | Composite | Energy absorption | Mechanical properties | Multi-walled carbon nanotubes (MWCNT) | UreaArticle10.1007/s12666-022-02589-310.1007/s12666-022-02589-32-s2.0-85128243664WOS:00078287820000122412253750975-1645