Fatih Kilicaslan M., Karakose E.Kilicaslan, MF, Karakose, E2023-05-092023-05-092018-01-012018.01.011733-3490https://hdl.handle.net/20.500.12597/14479In the present work, rapidly solidified Al-10Ni-XSc (X = 0, 1 and 2) alloys were fabricated by melt spinning under Ar atmosphere. The Effects of Sc on the microstructural and thermal properties and microhardness values were investigated by scanning electron microscopy (SEM), X-ray diffractometer (XRD) and a Vickers microhardness tester. Experimental results revealed that the addition of 2 wt. % Sc to melt-spun Al-10Ni alloys changed their brittle nature and hindered formation of cracks. The addition of Sc to melt-spun Al-10Ni alloys also changed the morphology of Al3Ni intermetallics from an acicular/needle – like to a rounded particle-like structure and led to reduction in their size. Formation of the metastable Al9Ni2 phase was observed due to the higher constitutional undercooling caused by Sc addition. A considerable improvement in microhardness value (from 95. 9 to 230. 1 HV) was observed with the addition of Sc.falseAl-Ni-Sc alloys | Melt spinning | Microhardness | MicrostructureArticle10.24425/11897610.24425/1189762-s2.0-85050075491WOS:000439031800006575579632300-1909