Ergen S.Uzun O.Yilmaz F.Kiliçaslan M.2023-04-122023-04-122013-05-0310445803https://hdl.handle.net/20.500.12597/6004In this work, the effects of Be addition on the microstructure and phase transformation temperatures of Cu-12Al-xBe (x = 0.4, 0.5 and 0.6 wt.%) shape memory alloys fabricated by using the arc-melting and melt-spinning techniques have been investigated. X-ray diffraction analysis revealed that the arc-melted alloys consisted of austenitic β1, martensitic β1′ and γ2 precipitate phases, whereas melt-spun ribbons were composed of a fully martensitic phase. The average grain size of martensitic phases in melt-spun ribbons was determined by electron microscopy images, showing a decrease with increasing Beryllium (Be) amount. Moreover, it was found that the Be addition in the arc-melted alloys had a distinct effect on the morphology of the γ2 precipitate phase. Transmission electron microscopy analysis showed that the thickness of martensitic plates in the melt-spun ribbons reduced with increasing Be addition. In a differential scanning calorimeter analysis, no martensitic transformation (Ms) peak was observed in arc-melted alloys, but it was clearly detected in melt-spun ribbons, in which Ms decreased dramatically with increasing Be addition. The improvement in the shape memory ability of melt-spun ribbons was explained in terms of the refinement in grain size and martensitic plates. © 2013 Elsevier Inc.falseBe-addition | Martensitic transformation | Melt-spinning | Shape memory alloysArticle10.1016/j.matchar.2013.03.0102-s2.0-84876851769